(844) 319-6621

(844) 319-6621
 

Kentucky Plumbers Specialists



Search City By Alphabetical Order to Enhance your Search

Most Popular Plumbing Services & Brands

Faucet Repair

A leaky faucet creates puddles of water and water not only destroys the walls, it can damage the flooring and make the house seem messy no matter how many times you clean. The only solution, then, is to repair a leaky faucet the moment you notice it. Even though a faucet seems easy enough to operate, dripping or leaking is not the only issue that might need fixing in a faucet. It is better to have a little knowledge of the parts of a faucet, their uses and common problems in a faucet.

Some Parts of a Faucet

  • Faucet Handle
  • Faucet Spout
  • Cartridge
  • Diverter Valve
  • Aerator

Common Issues of a Faucet

  1. Loose Faucet Handle

A simple solution to this is to tightening the screw that holds the handle. Another cause might be due to a worn stem inside the handle. However if your faucet handle is not loose but it is hard to operate, the problem might be with the cartridge. Check if your cartridge has debris inside and clean it or lubricate if it is stuck. If it is defective, call a professional to replace.

  1. Dripping or leaky faucet

A leaky faucet is highly problematic for the home. The problem might be coming from the O-rings, lubricate the O-rings with silicone-based grease. If the problem persists, you need to replace the O-rings. For a dripping faucet, replace the valve seat.

  1. Low water pressure

The water pressure in your faucet might be low because your sprayer diverter is clogged. The diverter controls the water that goes into the faucet. If it is clogged, try cleaning it with vinegar. Note that the way you clean depends on whether your faucet is one-handled or double-handled.

  1. Spray Misting

This is when your faucet produces water unsteadily or erratically. The water will spray mist due to lack of enough air. The main cause of this is the aerator. Your faucet aerator might be loose, clogged or defective. If it is loose, screw tightly. Clean thoroughly if it is blocked but if these do not work, then you need a professional to replace your worn aerator.

  1. Noisy Faucet

If your faucet is making funny hammering noise after you turn it off, it is known as water hammer. You might want to install an air chamber. If you already have an air chamber, it may be clogged with debris. If you find debris in your air chamber, clean thoroughly. Contact a professional to install an air chamber.

The best way to address any plumbing issue is to contact a professional. This not only saves you money, it saves time too. If you notice any of the issues mentioned above or other problem with your faucet, reach out to us immediately and you will glad you did.

Showers And Tubs Repair

Bathtubs and showers are made not only to keep you clean but also relaxing. Now imagine if you have to put up with a clogged bathtub or a shower that drips slowly. Drains and leaks are the two most common problems of showers and bathtubs, but other plumbing issues can be equally annoying.

Showers and Tubs parts

  • Faucet- there are two forms of faucet, there is a cartridge faucet and a compression faucet. You should know the type of faucet you have to be able to troubleshoot it.
  • Tub spout- this directs water into the tub.
  • Drains- carry waste water out from the tub and keep the water from overflowing
  • Diverter- takes the water from the pipe to the showerhead

Common Issues with Showers and Tubs

  1. Drain Issues

Items like hair, soap and even mineral deposits from hard water could block the free flow of water down the drain. The solution to this can be as simple as pouring hot water into the drain, using vinegar or a plunger to unclog the drain. If your water still does not flow, contact a plumber.

  1. Low water Pressure

Water running slowly from your showerhead could be as a result of lime scale buildup. The solution to this is to use a descaling solution or replace the showerhead. Contact a professional for a suitable showerhead replacement.

  1. Leaky Showerheads and Tubs

If your showerheads and tubs are consistently wet even when you are not using them, then you have a problem common to most showers and tubs- leaking. A cracked or rusty gasket can bring about a leak with your tub while the water supply valve and the washers may need replacement in your showerheads. 

  1. Leaky Faucet

A leaky faucet might be as a result of faulty rubber washers, seals or gaskets in the valve compartment. If any of this is defective, you can easily replace it on your own or call a plumber to replace the whole faucet.

Proper maintenance of the showers and tubs keep it in excellent condition but no matter how careful you are, some parts of these fixtures are going to develop faults at some point. Some of these you could simply rectify on your own but to prevent bigger problems, you need a plumber for others.

Repiping

When you compare the usage frequency of your structures as a commercial establishment to a residential building, the commercial structure suffers more usage and abuse. Within a short time, the plumbing structure goes through enough stress than it is made to handle. In such scenario, there will be a need to carry out an overhaul of your piping and sewer systems. It can even be more daunting when you commercial structure is considerable older.

As a professional plumbing company, we handle the repiping of different types of structures; church, motel, hotel, hostel, medical facilities, office apartment and many more. We put our experienced professionals to the task of ensuring that you get the best out of re-piping.

When Should You Consider Re-Piping

Of course, you need to carry out scheduled and regular maintenance of your commercial building. However, when it comes to total overhaul and re-piping, it must be carried out in the following scenario;

1. Aged and Older Building

Look at the age of your building and determine if you can be sure it’s at 100% strong enough withstand another year. Call on our professionals as they are in the best position to determine this.

2. Water Wastage and High Water Bills.

There will be a need to carry out re-piping when you notice water is being wasted than usual, if you notice the drains are never dry. This will lead to amassing high water bills. Then there will be a need to consider re-piping.

3. Water Pressure Issues and Mold

Re-piping must be considered when the water flow and pressure is becoming a pain. This should point to leakages and weakness of the piping system. When you notice molds also, you should give a thought to re-piping

Whatever it is, may be old, corroded, damaged, or weak, then re-piping by our professionals should be the next line of action.

Toto

Toto in Kentucky

Toto has a reputation that precedes them in the aspect of innovative designs and hi-tech plumbing fixtures. The brand has remained a top choice among tech-savvy customers who love every of their utility outlets sophisticated. Toto provides high quality plumbing fixtures and fittings that are durable and reliable.

Add to the quality of the brand, their products come with a warranty as an expression their commitment to customer satisfaction. The Japanese leading manufacturer has continued to reign in its steads and for over 100 years Toto has not only become loved by Asians only, American and European homes have fallen in love with the brands innovation.

Toto is on a mission to advance bathroom cultures through a life-enhancing and clean technology.

copyrights © 2019 Find Local Plumbing .   All rights reserved.