(844) 319-6621

(844) 319-6621
 

Connecticut Plumbers Specialists



Search City By Alphabetical Order to Enhance your Search

Most Popular Plumbing Services & Brands

Sewage Repair And Replacement

Your sanitary sewer serves as the link between your commercial building and the treatment or disposal system. You may not like to talk about your sewage issues but you’ll eventually have to deal with it. Usually, your sewage issues may be beyond just a repair. Don’t be hesitant in involving our professionals as it can be a nuisance and also lead to serious health risks. When it’s beyond a repair, you may have to think of replacements.

Sewage Parts Susceptible to Problems

When you notice issues with your sewage, it is likely to be caused by any or a combination of the following;

1. Broken Sewer Line:

Our experts will trace your sewer line for cracks and damages. This might lead to leakages that leads to a form of environmental pollution. There might be a need to reline the pipes to your sewage, or a hydraulic replacement when its too damaged beyond repair. Nonetheless, it may be a case of a simple maintenance.

2. Bathroom Not Draining

This can lead to a whole lot of mess for you indoor. This messy scenario which our experts don’t consider as dirty might have occurred as a result of numerous reasons. It’s the job of our plumbing experts to trace the problem to the root and ensure it doesn’t happen anytime soon.

3. Foul Odor Due to Sludge Build-Up

All these reasons leads to one point, unbearable smell in the environment. Let’s assume you run a factory or an office building, you’ll be exposing your visitors, employees and customers to health issues if the sewage problem is not fixed.

When Should You Call Our Professionals?

You should not wait until it has gotten to an unbearable point before getting across to our professionals. Waiting could be quite dangerous as it will be getting worse by the day. Just have it in mind that it takes our professionals 90 minutes to get to you!

Hydro Jetting

No one wants to deal with the mess and smell that comes from a clogged sewer line. There are faster options that may work in the short term in unclogging your drains but they are still far behind when Hydro Jetting is applied. Hydro Jetting provides a temporary and potent fix to your sewer line issues. Hydro Jetting is an invasive procedure that frees your drains of every sediments, clogging and messy build-up that dates back into years.

How Is Hydro Jetting Done?

Hair, tree roots and grease are usually culprits that blocks your sewer line. Our professionals usually recommend hydro jetting when other methods such as snaking with an auger seems to be ineffective. Hydro Jetting is done by pumping streams of pressurized water into the sewer line. Let’s say between 3,000 PSI to 8,000 PSI. of course, there’s no debris or obstruction that can withstand this pressure without giving way.

Hydro Jetting is a long-lasting solution that targets more than just the suspected clogs, it also reach out for even those unknown within your sewer line.

When Should You Consider Hydro Jetting?

Only professionals can decide whether hydro jetting is the best option to fix the messy situation. But usually, hydro jetting is inevitable when the following has been considered;

1. When every other option has been tried and exhausted. For instance, snaking with an auger.

2. After the strength of your sewer line is certified strong enough to withstand the extreme pressure. Hydro jetting will never be utilized on old, weak and fragile pipes.

3. A thorough inspection of the sewer lines which is able to trace the problem and recommend that hydro jetting is the best of the available alternatives.

Hydro Jetting isn’t for the novice as they are likely to cause more damage. This is why you should reach out to our professionals with years of experience in carrying out hydro jetting.

Water Heaters Repair

With your ever-reliable water heater, you shower with hot water, wash your dishes and even do the laundry. This makes water heater an important part of our everyday life, so, when it develops an issue, it calls for immediate attention. Water heaters can be a gas or an electricity water heater. Irrespective of the type of water heater you have in your home, the following parts are common to the two types.

Parts of Water Heaters and their Purposes

  • Anode Rod prevents water heater from rusting.
  • Thermostat is used to adjust and maintain the temperature in the tank. For gas water heater, it part of the gas valve but the electric water heater has two thermostats, the upper and the lower thermostat.
  • Temperature and pressure (T&P) relief valve relieves the pressure build-up by your water heater.
  • Dip Tube directs cold water to the bottom of the water heater tank.
  • Drain valve flushes the tank to drain the hot water heater.

Common Issues with Water Heaters

  1. Water Leaks

Water leaking from your water heater might be due to loose drain valves or leaky pipes. Check if the drain valve is loose and tighten it. You can then check if your T&P valve is not damaged, if it is, it needs to be replaced. You may tighten the drain valve by yourself but contact a professional to replace a defective T&P valve.

  1. Smelly or Discolored Water

Good water is said to be colorless and odorless but what happens when your hot water is smelly and/or colored. Bad odor might be coming directly from the water source or it could because the anode rod is rusty. Rusty anode rod can make water smell or discolor. The minerals in the water might also be the cause of the discoloring. Flush the hot water tank or call a plumber to replace a defective anode rod.

  1. Temperature Issue

Issues with water heater temperature might be because your water heater is not hot at all, it is not hot enough or it is too hot. If the water from your gas water heater is not hot at all, adjust the pilot light setting. Check the electricity connection to the water heater for electric water heater. A broken dip tube might make the water not to heat properly and the thermostat issue might be the cause of a water heater producing scalding hot water. Call a professional to replace your dip tube.

  1. Noisy Heater

The noise your water heater makes will determine what its problem is and how to tackle it. If your water heater is making a gurgling sound, the solution is to drain the tank and clean out the sludge or sediment. You can do this yourself. A water heater that makes a heating noise is dangerous and requires the attention of a professional immediately.

Carrying out a repair of hot water requires some levels of finesse and expertise, which only a professional plumber can deliver. Get in touch with us today and safe yourself precious time and money.

Brasscraft

Brasscraft in Connecticut

If you are a little confused about where to get all your plumbing fixtures from, Brasscraft is your perfect choice – you’re welcome. The company is renowned for the production of an extensive range of high-end plumbing sets.

Brasscraft gives you an assurance of quality and a lot of homes and businesses have relied on their assuredness to make their daily routine a lot easier. Brasscraft offers products that have been highly engineered to give you the peace of mind you desire.

The strength and diversity of Brasscraft’s product line is focussed on ensuring that you have everything you need to be healthy, safe and happy always. The innovative design and doggedness of Brasscraft product ensures that brand remains a top choice for over 70 years.

copyrights © 2019 Find Local Plumbing .   All rights reserved.